Adic Scalar 1000 Manual do Utilizador descarregar pdf (Página 22)

twenty

Library Configurations

Scalar 1000

AIT1 AIT2

AIT AIT Total Total

Drives

Cartridges Capacity

Capacity

Base Control Module: 2 to 12 237 16.6TB 23.7TB

With 1 Expansion Module: 2 to 24 492 to 552 38.6TB 55.2TB

With 2 Expansion Modules: 2 to 36 747 to 867 60.7TB 86.7TB

With 3 Expansion Modules: 2 to 48 1002 to 1182 82.7TB 118.2TB

Drive and Performance

Drive Type: AIT1 AIT2

Data Cartridge Capacity AIT AIT2

Native: 35GB 50GB

with 2:1 Compression: 70GB 100GB

Transfer Rate per drive

Native: 180MB/min 360MB/min

with 2:1 Compression: 360MB/min 720MB/min

File Access Time (Avg): 37 seconds with MIC

Data Compression: ALDC (Adaptive Lossless Data Compression)

Data Buffer: 4MB 8MB

Media: AIT1 AIT2

Tape Length: 230m

Recording Density: 116,000 bits/in 167,000 bits/in

Error Correction Code: Read after write enhanced C3 ECC

Operation

Cartridge Change: 6 seconds maximum

Indicators: Password-protected keypad with LCD

menu display

Drive: Status LED and eject buttons

Drive Interface: Fast and Wide SCSI-2 Differential

Library Interface: SCSI-2 Differential

SCSI Connections: 68-pin micro-D

Reliability

Hard Error Rate: Less than 1 in 10

bits read

Tape Shelf Life: 30 years minimum (at 20°C, 40% RH)

Maintenance: Cleaning not required unless indicated by

drive LEDs

MSBF: Greater than 1,000,000 cartridge changes

MTTR: Less than 30 minutes

Drive MTBF: Greater than 200,000 power-on hours

Field Replaceable: Drives, Power Supplies, Gripper Assembly,

Barcode Reader, Control Electronics Module,

Hot Swappable Drives

Diagnostics: Built-In-Test (BIT), Store/Recall Past Events,

“Fault Isolation” Assistance, Self Initiating

Configuration and Calibration Routines

Physical

Control Module: 29.5"W x 47"D x 72"H

(74.9cm x 119.4cm x 182.9cm)

Weight: 1052 lbs. (477Kg) maximum weight

Expansion Module: 29.5"W x 47"D x 72"H

(74.9cm x 119.4cm x 182.9cm)

Weight: 817 lbs (372Kg)

Environmental

Electrical: 115/230 VAC, 1.6kVa

Altitude: 10,000 feet

Temperature: 16°C to 32°C Operating

Humidity: 15 to 75% Non-Condensing Operating

Compliance and Certification

Year 2000 Compliant

Safety: UL-1950 ITE, CSA950, EN 60950

Emissions: FCC #47 CFR, Part 15, Class A, CSA C108.8M,

EN 55022, Class A

Immunity: IEC (1000-4-2, 3, 4)

International: CE

Software and Platforms

Consult the most recent ADIC Software Compatibility Guide for a

complete list of software and platforms compatible with the Scalar

Library Series.

AIT drives offered in pairs.

with 2:1 compression. Capacities specified use 230m media. For

170m media reduce capacity by 28.6%

With 2:1 compression.

Without affecting library operation. Bus integrity must be sustained.

Scalar 1000 / AIT Specifications

Year 2000

Compliant

All specifications subject to change without notice. All products and company names should be considered trademarks of their respective companies.

Scalar

and ADIC

are trademarks of Advanced Digital Information Corporation. DLT™ and DLTtape™ are trademarks of Quantum Corporation. AIT™ is a trademark of Sony Corporation

3590 & Magstar are trademarks of IBM Corporation

1 2 ... 17 18 19 20 21 22 23 24

Comentários a estes Manuais

Sem comentários

Adic Scalar 1000 Manual do Utilizador Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Adic Scalar 1000