ADIC DLT 7000 Especificações descarregar pdf (Página 18)

8 Installation

Unpacking and Inspecting

Unpack the T5 chassis and visually inspect for any damage that might have occurred during shipment. Retain

the shipping carton in case reshipment is necessary.

Remove the top cover of the chassis and inspect the power supplies and cabling for component damage. If

any damage has occurred, notify ADIC immediately.

Each shipping carton should contain the following:

• A T5 Enclosure chassis with two removable power supply assemblies and internal SCSI data cables, as

ordered.

• Accessories box containing this Installation and Operating Guide, a right and a left side rack mount

support bracket, and an accessory bag containing an AC power cord and hardware necessary to rack

mount the enclosure.

Installing Tape Drives

1. Insert each drive carrier assembly into the unit. Check the carrier to insure proper docking connections.

2. Fully tighten the captive screw at the top and bottom of the carrier to secure it in the T5 chassis.

Caution

When inserting a carrier, be sure that the orientation of the carrier is

correct. The SCSI data cable connector should be nearest the top of the

chassis.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 45 46

Sem comentários

ADIC DLT 7000 Especificações Página 18